Scotload’s static line monitors are ideal for hostile marine and offshore applications where a fixed means of measurement is impractical.
Manufactured from high tensile aluminium or stainless steel, our static line monitors can be customised to suit various rope sizes. They are easy to transport, install and operate and provide highly accurate readings to ensure that loads remain within safe working limits.
We have a range of static line monitors in stock available to buy or hire, ready for immediate dispatch. ?We also offer a custom design and manufacturing service to suit any specific requirements, as well as an in-house repair and calibration service up to 100 tonnes, traceable to national standards.
Features and benefits of static line monitors:
- Easy to transport
- Robust construction
- Simple to use
Cabled static line monitor typical specifications:
| mA output | |
|---|---|
| Rated load | As required |
| Proof load | 200% of rated load (dependent on rope capacity) |
| Rope diameter | 22mm to 50mm |
| Operating temperature | -20oC to +60oC |
| Storage temperature | -30oC to +80oC |
| Environmental protection | IP67 |
| Output signal | 4-20mA |
| Electrical connection | 2 or 3 wire |
| Cable connection | Gland and connector |
| Cable length | 5m as standard |
| Recommended supply voltage | 24V |
| Maximum supply voltage | 30V |
Wireless static line monitor typical specifications:
| Wireless output | |
|---|---|
| Rated load | As required |
| Proof load | 200% of rated load (dependent on rope capacity) |
| Rope diameter | 22mm to 50mm |
| Operating temperature | -20oC to +60oC |
| Storage temperature | -30oC to +80oC |
| Environmental protection | IP66 |
| Output signal | Wireless |
| Data logging | In interface |
| Battery type | 3 x D |
| Active battery life | Up to 500 hours |
| Standby battery life | Up to 1700 hours |
| Telemetry frequency | 2.4Ghz ISM |
| System range | Up to 350m |
| Sampling rate | 10Hz (500Hz max) |
Static line monitor typical dimensions:
| Measurement | |
|---|---|
| A mm | 12.5 |
| B mm | 2.5 |
| C mm | 147.5 |
| D mm | 147.5 |
| E mm | 320 |
| F mm | 319 |
| G mm | 191 |
| H mm | 66 (max) |
| I mm | 66 |
| J mm | 140 |
| K mm | 9 |
Available options:
- Aluminium or stainless steel construction
- Available with SmartLoad® technology
- Cabled or wireless
- Hazardous area Zone 1 and 2
How long will it take to dispatch?
Most of our stock is already in stock, available for immediate dispatch. Larger capacity load cells will often take around 2-3 weeks until dispatch. If you need it sooner than this, please contact us for more information – an express service is available.
What is the range of your wireless system?
With SmartLoad®, you can achieve 350m (direct line of sight) using our wireless handset. If you need more than this, SmartLoad® also offers a range of transmitters and receivers to enable you to receive load out information well over 3000m. And if you need further than this, our wall mounted display also offers output via Ethernet, meaning you can essentially relay this information anywhere on the globe with an internet connection.
What connections does SmartLoad® have?
None. Our system is fully wireless (we do have wired version which are not SmartLoad® variants). That being said, these can be connected to either a PC or wall mounted display (options) which offers a range of standard connections you can utilize.
Is a calibration certificate supplied?
Yes – a full calibration certificate is supplied, valid for 1 year from date of issue
Do I have a warranty with my load cell?
Yes – a standard 1 year manufacturer’s warranty is included. For extended warranty packages, please contact us for more information.
Is it shipped with batteries?
For UK orders, yes. For orders overseas, we recognize that often the batteries will actually delay being processed in customs and therefore we do not ship these with batteries. If you would like these however, please state this and we will ensure they are shipped along with your load cell.
